Products

Processes: Flux-Cored, Submerged Arc Product Number: K210-2 NA-3S Controller K388-2 NA-4 Controller K208A NA-3S/NA-4 Head K209A NA-3SF/NA-4F Head AC Input Power: 115/1/50/60 Wire Size Range (Varies by Model): .035 - 7/32 in (0.9 - 5.6 mm) Wire Feed Speed Range: NA-3S: 25 - 650 ipm (0.6 - 16.5 m/min) / NA-4: Subject to arc voltage used Net Weight/Dimensions (H x W x D) NA-3S: 44 lbs. (20 kg) 11.0 x 13.5 x 12.3 in. (279 x 343 x 312 mm) NA-4: 35 lbs. (16 kg) 11.0 x 13.5 x 9.70 in. (279 x 343 x 246 mm) FEATURES *Operating Versatility - Easily adapt to a wide range of wire feed speeds and wire sizes. *Compact Units With Excellent Flexibility - Fit into simple fixtures or the most complex automated production lines. *Rugged Construction - Minimize downtime and maintenance costs. RECOMMENDED LINCOLN ELECTRIC POWER SOURCES * NA-3S: Idealarc® DC-600, DC-655, DC-1000 and DC-1500 * NA-4: Idealarc® AC-1200

ArcLink®-enabled Controller for Power Wave® AC/DC 1000® SD Systems: The MAXsa® 10 controller offers a single monitoring and control point for the entire hard automation welding system. Operators have full control over AC and DC welding parameters and easy PLC interfacing to control fixture travel, timers and other system commands. Key Features: •Severe Duty Ready – The controller is IP23 rated and ready for operation in harsh environments. • Pendant Box – Mount the controller in the standard protective box or remove the pendant for hand-held operation. Extend hand-held operation from 4 feet (1.2 m) up to 100 feet (30.5 m) with an ArcLink® extension cable. • Eight Procedure Memories – Pre-set and save your optimal welding parameters for repeating applications and recall later for fast changeovers. • User-Friendly Controls – Clear digital display and controls make it easy to set weld modes, AC operation, strike/start/end options, travel stop/ start, timers and other parameters. • Limit Control – Apply operator procedure limits or lockout on any or all parameters. • Waveform Control Technology® – Allows the user to choose from a library of pre-programmed weld modes. Parameters for each mode can be adjusted within a limited range to achieve optimal balance between deposition rate and penetration.

APPLICATIONS: *Construction *Aerospace *Fabrication *Automotive *Production *Weld Training FEATURES *PowerConnect® Technology (Patent-Pending) – Automatically adjusts to input power from 200-600V, 50 or 60 Hz, single phase or three phase. Welding output remains constant through the entire input voltage range. *Tribrid® Power Module – Exceptional welding performance with high power factor and efficiency. *CheckPoint® – A cloud-based system to view or analyze your welding data. Track equipment usage, store weld data, configure fault limits and more. *Optional 115V (10A) AC Duplex Auxiliary Power Receptacle – Features patent-pending Surge Blocker™ Technology to ensure simultaneous welding performance is not compromised by high starting current devices such as grinders (typically requiring 60A or more peak surge current). *Compact and Durable Case – IP23 rated to withstand harsh environments. *Standard Ethernet – Allows for effortless software upgrades through powerwavesoftware.com

Submerged Arc Wire Feeder Rover™ Tractor is a self-propelled automatic tractor designed for submerged arc welding. It easily follows the welding joint when moving along the required track sections (sold separately). It can be connected with the POWERPLUS™ 1000HD,Idealarc® DC-1000 and Idealarc® DC-1500. The Rover™ Tractor is sturdy, durable and has a compact profile. It can be used to weld a wide range of thicknesses of mild steel, low alloy steel or stainless steel. The Rover™ Tractor is the ideal choice for welding applications such as shipbuilding, structural steel, boilers and pressure vessels. Advantage Lincoln: ● Stable travel speed for consistent welding results. ● Ability to preset the wire diameter (2.4 to 4.8mm) for optimized arc startings. ● Easy adjustment of head and torch. ● Standard wire straightener to provide stable feeding with less power loss. ● Duty cycle: (1,000@100%) 1,200A @ 60% ● Easy to understand operation panel. Design Features ● Ability to preset amps and volts. ● Wire diameter selection helps to optimize the welding performance using diameter-specific welding parameters. ● Fixed point start function allows for precise wire positioning. ● Touch sense function ensures that the wire stops when touching the plate.

Features • 380-575 VAC, 50/60 Hz Voltage Input – offers the ability to be connected anywhere in the world. • No hardware reconfiguration required with easy polarity switching – eliminates downtime. • Easy to parallel machines or run multiple arcs. • 3-Phase voltage Input – eliminates the imbalance associated with transformer-based AC welding machines. • 95% power factor correction – enables connection of multiple machines on the same plant infrastructure for lower installation costs. • Severe duty – can be stored outdoors. IP23 rated. • ArcLink®, ethernet and DeviceNet™ communication – offers remote process monitoring, control and troubleshooting. • True Energy™ – measures, calculates and displays instantaneous energy in the weld for critical heat input calculations. • Production Monitoring™ 2.2 – track equipment usage, store weld data and configure limits to assist in welding efficiency analysis. • Software based controls – can be upgraded as new features become available. • iARC™ digital control – 90 times faster than the previous generation, delivering a responsive arc.

Lincoln Electric Power Wave PW 1000

The LT-7 Tractor is a self-propelled mechanized wire feeder, designed for the submerged arc process with track system capabilities. It is self-guiding and easy to operate – only one operator is usually required. It is designed to be used with a variety of Lincoln DC constant voltage and constant current power sources. The rugged, lightweight unit permits quick movement to the next joint. Its compact size fits through small openings and confined spaces. Butt and fillet welds can be made on heavy plate or steel as light as 12 gauge (2.5mm). The LT-7 Tractor is ideal for the following applications: ship and barge building, storage tank erection, bridge deck installation, beam, girder or column fabrication, and long seams on heavy weldments.

GTAW PROCESS TIG welding produces an precise weld and is a commonly used as high quality welding process. TIG welding has become a popular choice of welding processes when high quality, precision welding is required. DC polarity is used in most welding applications. It produces a smoother welding output compared to AC. It creates a more stable arc, easier welding and less spatter. You can also either use DC negative for faster deposition rates when welding thin sheet metal or use DC positive for more penetration into the steel. Advantages:  Produces very high-quality, superior welds,  Leaves no slag or splatter.  Particularly high visual quality of weld seams  Uses a number of shielding gases including Helium (He) and Argon (Ar)  Is easily applied to thin materials and Welding yields low distortion,  Welds can be made with or without filler metal  All welding positions are possible

This multi-process welder delivers up to 815 amps of welding power for a variety of applications, including construction, shipbuilding and heavy fabrication. Embedded CrossLinc® Technology drives welding control at the arc without an added cable to save costs, increase quality and enhance productivity and safety on the job site. The world-ready Flextec® 650X will run on a wide range of available voltage input power and is IP23 rated for outdoor operation and storage. Broad wire feeder compatibility is not an issue – The Flextec 650X will operate with almost any Lincoln Electric® wire feeder or welding process. Simple. Reliable. Flexible. Specify the Flextec 650X for your heavy duty applications. KEY FEATURES: Simple: »» Easy one-knob weld process selection »» Fast inverter arc response means smooth arc action and consistent bead appearance »» User weld schedule memory storage allows easy recall of your critical or often repeated weld procedures with applicable feeders »» Synergic single knob control over wire feed speed and voltage with applicable feeders Reliable: »» Components designed to run cool for long life in high temperature environments »» Engineered for outdoor use and harsh environments (IP23 rated) »» Desert Duty® Rated for extreme temperatures up to 55°C Flexible »» Ideal for large diameter wire or stick welding on thick materials »» Compatible with most Lincoln Electric feeders, including common bench and boom models, portable across-the-arc models and CrossLinc® or ArcLink®- equipped models »» ArcLink digital communication compatibility ensures the Flextec 650X remains ‘future-proof’ as new wire feeders are introduced »» Premium arc characteristics on all DC wire, stick and TIG processes »» Up to 815A for heavy arc gouging CrossLinc® Technology Compatibility »» Full functionality without control cables »» Enables remote procedure setting at the feeder to improve weld quality »» Increases arc time with fewer trips to the power source to adjust settings »» Improves safety by reducing jobsite clutter

Lincoln Electric Pipefab Welding System for Pipe & Vessel Fabrication

Lincoln Electric New Speedtec Pulse MIG Series

Key Features: The Powerind 400S is a constant current (CC) DC inverter arc welder with advanced IGBT powerful module, which can adjust welding current and current ARC force to enable the welding power source to achieve the adaptability to excellent welding procedure. Advantage Lincoln: *IGBT inverter technology and rapid recovery diode as its main control and transfer components. *Light weight and portable- easy to move and suitable for stacking. *Features Lincoln’s latest generation Inverter technology for maximum reliability *Thermal overload and single phasing protection for stable welding output under all demanding conditions *Extra-ordinary arc striking and metal transfer due to the application of proper control of arc striking circuit. *Applicable in downward welding in the vertical position and the long arc spray transfer welding by way of cellulose welding. *Adjustable Hot start control Makes electrode priming easier and prevents it from sticking when cold. Adjustable arc force control provides the ability to weld with a very short arc even touching the welding material. *A great variety of arc performances to satisfy the need of different welding procedure it can support MMA and TIG welding *Display the presetting and actual current and voltage by switching the display *Powerind 400S series IGBT (Insulated Gate Bipolar Tube) welder adopts movable case structure. *It has a protection rating of IP21S. Processes: STICK , SCRATCH TIG