harris

EATURES: Two-stage flowmeter regulator Forged brass body for maximum strength Cylinder gas supplied Inlet filter to protect against contamination Precise gas flow control Strong flowmeter resistant to mechanical damages Polycarbonate outer tube cover with good 360° visibility Side entry First stage - capsule valve with Kel-F (CTFE) seat Second stage - one-piece encapsulated seat design with internal filter and PTFE (Teflon®*) seat Lockable version available MAX INLET PRESSURE (bar): 300 Flow: 0-30 l/pm DELIVERY PRESSURE GAUGE (bar): 0-400 Supply FlowGAUGE (lpm): 0-34 Inlet Connection: W21,80x1/14''RH Outlet Connection: G1/4RH

Model K-43 heating torch assembly for use with alternate fuels features the heavy duty 42-3 heating handle, 2393 stainless steel tip tube and the high-flow E3-43 (F-43) mixer. It is designed to use Harris 2290-H and 2290-HPM high-performance, multi-flame, heating tips. Ideal for use with RBA and RBP flame cleaning heads. (Assembly does not include tips. Tips sold separately.) Heats up to 1,025,000 BTU. Alternate fuels include propylene or propane-based fuels and natural gas. **Fuel gas pressure requirements of 10 psig. **For fuel gas pressures of 10 psig or less use Model B-43-N mixer (PN 9100306), Model 43-2 handle (PN 1401150) and 2393 tip tube/Tip combination available. Limited to tip sizes Model 2290 1-3H or 1-3HPM. Features Heavy duty heating torch assembly designed to use alternate fuels* "E" equal or positive pressure mixing system resists damage due to flashback Features the heavy duty 42-3 heating handle;2393 SS tip tube and the high-flow E3-43 (F-43) mixer Designed to use the Harris 2290-H and HPM high-performance multi-flame heating tips Ideal for use with RBA and RBP flame cleaning heads On year manufacturer's warranty

Harris specialty gas equipment is used in a variety of industries including analytical labs, chemical processing, research and development, and biotech and pharmaceutical. Our gas management systems include pressure control, flow control, gas purification, cylinder storage and telemetry systems.The DataSMART® manifold is a gas distribution system used to monitor, control and switch the flow of gas from bulk, cryogenic or high pressure cylinders while maintaining a settable, constant delivery pressure to the facility or process. It puts all aspects of your gas system at your fingertips. Even though DataSMART® works as a fully automatic switchover manifold, it provides so much more with its SMART FEATURES.

Model B15-3 is an "E" equal or positive pressure mixer for use with all fuel gases. The B15-3 mixer is recommended for light duty welding, brazing and heating tip applications. This model has a mixer-to-tip tube thread size of 5/16" - 27. Its welding capacity is 1/2" (12.7mm) plate and it heats up to 60,000 BTU. Typical applications include metal art, maintenance, production brazing, etc.

Banner-HPG-Catagory-BRAZING-1440x360.jpg Brazing Alloy Our brazing portfolio includes aluminum, phos coppers and high silver alloys, rings, return bends and strip. Our alloys are available in rods, solid wires, flux cored and flux coated, and rings in both imperial and metric sizes.hoosing the right brazing alloy and the right amount for your application depends on several factors including base materials being brazed, clearance of parts, service conditions, brazing temperature and alloy cost. Phos Coppers - Alloys from 0% - 18% silver content. AWS BCuP classification. Used for copper to copper joints and for copper to brass joints. High Silvers - Alloys from 18% - 99.9% silver content. AWS BAg classification. Used for copper to steel, steel to steel, and brass to steel. Aluminum - Pure 4047, 78/22, 98/2. Use for aluminum to aluminum joints and for aluminum to copper joints.

Harris manufactures a wide variety of torch products that will meet the needs of most fabricators. Harris can also custom design a torch to meet any special requirements. Whether a customer needs to cut 60’ material or any specialty alloy such as aluminum, stainless or cast iron, Harris can design and manufacture a specialty torch for the application.

FEATURES *Connects to remote alarm systems. Up to 3 amps 30 volts (DC) or 2 amps 250 volts (AC). Visual remote alarm is standard. Audio/Visual alarm optional *Fully Automatic Change-over - no levers to reset, continuous, uninterrupted gas flow. The only manual function is to replace depleted cylinders *Display read-out in PSIG, KPA or BAR *Micro controller monitors all functions and controls change-over *Built to accommodate future cylinder expansion by adding header extensions *Special header configurations available upon request *Optional audio/visual alarm and floor stand available *Manifold Outlet: 1/2” MNPT *Relief Valve Outlet: 1/2” MNPT *24” flexible stainless steel pigtails with check valves *1/2” brass, silver brazed headers *Electrical - 115 volts (AC)

Series 220 The Series 220 Manifold prevents downtime by automatically switching gas supply from the primary cylinder bank to the reserve cylinder bank. All components are enclosed and protected inside a tamper-resistant case. A green light indicates the primary cylinder bank is functioning and the reserve cylinder bank is ready for service. A red light alerts the user that the unit has changed over and one or both banks are depleted (except on fuel gas units). The user resets the primary bank by turning the knob. FEATURES *All systems include stainless steel braided pigtails with PTFE lined inner core except, helium and hydrogen systems that have a thermoplastic inner core *Acetylene systems include: 500 SCFH flashback arrestor and piping, stainless steel braided pigtails with individual flashback arrestors and check valves *Electrical - 115 volts (AC) except for fuel gas *Manifold outlet - 1/2” NPT *Relief valve outlet - 1/4” NPT *1/2” brass, silver brazed headers OPTIONAL ACCESSORIES 4300698 - Remote Alarm Box 4300699 - 10ft. Alarm Cable 4300709 - 50ft. Alarm Cable For Fuel Gas Alarms see page 25

Semi-automatic switchover manifolds prevent downtime by automatically switching gas supply from the primary cylinder bank to the reserve cylinder. The user resets the primary bank by turning the knob. Designed for applications where continuous flow of a gas is critical and pressure differential of outlet pressure is tolerated or as a first stage of pressure reduction. It features modular shut-off diaphragm valve with one inlet on both sides for a cylinder / bank of cylinders and shutoff ball valve on low pressure side to allow maintenance without shutdown. FEATURES: *Model H25 regulator: - designed according to ISO 7291 standard - stainless steel diaphragm - high pressure capsule seat with Kel-F (CTFE) sealing surface - sintered bronze filter - 25 micron - stainless steel T-screw handle - internal or external safety relief valve - factory pre-set outlet pressure - 7 year warranty *Up to 300 bar inlet pressure *100% tested at nominal pressure *Compact design *“Plug and go” - delivered ready to use *Easy to extend – just add modular extensions *Main ball shut-off valve ½” *All modular components fully tested for stability, functionality and gas tightness *Quickly and easily replaceable pressure gauges *Modular header valve with purge and non-return valve as an option *Mounted on an electro and laser engraved stainless steel plate *Working temperature from - 20oC to + 60oC *Inlet 1/4” NPT F *Outlet G1/2” *Weight: one inlet 7,6 kg RELATED OPTIONS: *Extensions *Inlet non return valve *Purge valve

Description: ▪▪ Alarm box is used for monitoring low supply pressure gas source and inform user visually by LED light and acoustically by loud buzzer. ▪▪ Three version available 2, 6, 10 possible contact connection ▪▪ Readable LED light display ▪▪ 230V AC, 50 Hz; 110V AC, 60 Hz power supply (on request) ORDERING INFORMATION: 4302085: HAS1, 1 connection 4302086 :HAS2, 2 connections 4302087: HAS4 4 connections 4302088: HAS6, 6 connections 4302089: HAS10, 10 connections

Harris Flowgauge Regulators

Harris INFERNO Brazing Torch