s

The products range from welding protection curtains, lamella curtains, welding protection walls, welding protection blankets up to complete partition wall systems and individual soundproof booths. Partition wall systems from KEMPER are used in many training centres and schools and always ensure optimum working conditions.

DESCRIPTION : SUPERMIG 70S-6 is a copper coated Mn-Si alloyed solid wire suitable for welding with Co2 or 80% Ar 20% Co2 shielding gases. Excellent mechanical properties and good x-ray quality weld. Suitable for GMAW of unalloyed steels, used in general construction, automotive components, pressure vessels, ship building etc. USP'S : Excellent weldability, good start, trouble free feeding, stable arc, minimum spatters, low fumes emission are the special characteristics of SUPERMIG 70S-6. Excellent feed ability 100% drawing residue free wire. Ultra clean.

Stainless steel fine wires are suitable for braiding, knitting & weaving applications and it is mainly used in mesh manufacturing, automotive, printing and filter Industries. AISI 302 AISI 304 / 304L AISI 305 AISI 309 AISI 309S AISI 310 AISI 310S AISI 314 AISI 316 / 316L AISI 316Ti AISI 321 AISI 321H

High efficiency, Iron powder electrode designed for outstanding deposition rates. Deposition efficiency is approximately 140—150 % .Excellent arc stability, soft fusion, fine ripples, self releasing slag, very low spatter. Applied for heavy steel structures, storage tanks, bridge girders, fabrication of earth moving equipments, pressure vessels etc. Frequently used for butt-welding plates with a heavy thickness and for fillet welds. Rutile type heavy coated, iron powder electrode with a deposition efficiency of 165% approx. It is designed for butt and fillet welds, used to large weld sections and making long fillet welds. Excellent arc stability, soft fusion, fine ripples, self releasing slag, very low spatter. Easy arc striking and re-striking.

Safety device for prevent backfire of acetylene, LPG, H2 and Oxygen gas

Key Features: The POWER IND 250C is a semi-automatic, constant voltage (CV) DC welding power source. This machine features a smaller footprint and the same rugged look that customers have come to expect from all Lincoln Electric industrial welding power sources. Processes: MIG/MAG Advantage Lincoln: *Light weight and portable- easy to move and suitable for stacking *Features Lincoln’s latest generation Inverter technology for maximum reliability *Thermal overload protection available for stable welding output under all demanding conditions *Machine comes with inbuilt 2 roll drive wire feeder with quick changeover wire feeding mechanism *Built in wire feeder *Equipped with a user friendly control panel which includes optional features such as 4step/2step switch and 0.8/1.0 mm wire selection switch. *Suitable for welding in all positions, and on a broad range of applications and materials such as carbon steel and stainless steel. The machine is especially well suited for general purpose shop floor and automotive sector requirements. Package includes *Welding torch (3m) *0.8/1.0 mm drive rolls *work cable assembly

Premium Cut Performance •• 200A, 100% Duty Cycle maximizes production efficiency •• Operates using air or oxygen plasma gas •• Production piercing of 1-1/4 in. (32 mm), edge start cut of 2 in. (50 mm) Ease of Use •• Full color graphic display with one-knob selection process •• Reliable arc starting with CleanStrike® Technology Low Operating Costs •• Liquid-cooled plasma torch for more consistent cuts and longer-lasting consumable life •• Less dross reduces need for secondary operations •• Inverter technology reduces energy demand Applications • Steel Fabrication • Pipe Cutting • Structural Steel Fabrication • Automotive/Transportation • Shipbuilding • Steel Service Center What's Included: --K4328-1 FlexCut 200 System One-Pak®: • FlexCut 200 • FlexCool® 35 Cooler • FlexStart® Arc Start Console --K4328-2 FlexCut 200CE System One-Pak: • FlexCut 200CE • FlexCool 35 cooler • FlexStart arc start console For Use With • Primarily designed to interface with Lincoln Electric's CNC cutting tables & pipe cutters • Ability to interface with most systems using an integrated built-in voltage divider card

Lincoln Electric Powerful 125A Air Plasma Machine

The Tomahawk® 1025 and 1538 Plasma cutting machines are built to handle harsh environmental conditions using Lincoln tunnel technology to separate the PCB’s and sensitive parts from the contaminating cooling airflow. The improved mains voltage tolerances and robust metal case with large protective rubber corners also make these machines suitable for operation on site with a generator or within a workshop environment. The Lincoln Tomahawk® concept for Plasma cutting focuses on three elements: S – An innovative and patented striking system preserves the electrode tip and extends its lifetime. P – Circular enhancements with improved radial airflow and innovative electrode/nozzle design concentrate the plasma stream. L – The internally cooled electrode and torch head and electrode/nozzle design considerably increase their lifetime. Features • Starting: innovative advanced arc starting without HF. • Performance: innovative advanced electrode and nozzle design. • Longer lifetime: innovative advanced design increases lifetime of consumables. • Faster: higher travel speeds and plate thickness. • Flexible: multiple torch configurations. • Different materials: mild steel, mtainless mteel, aluminium and many more. • Concentrated plasma stream: less heat input, less distortion.

Key Features: The Idealarc® AC1200 submerged arc power source is specifically designed for operation with Lincoln Electric’s NA-4 automatic wire feeder. It is a power source that you can count on day-in and day-out to provide proven performance. FEATURES • Scott® connection taps standard for two AC welding heads operated in tandem • Rheostat adjusts the output settings while welding or at idle • Three output studs with overlapping ranges • ±10% input line voltage compensation for maintaining weld consistency • Thermostat protection from current overload and excessive temperatures • Terminal strip for remote control and wire connections and output studs for welding cables • Removable side panels for easy access to internal parts • Windings and rectifiers protected against moisture and corrosive environments • Seven-year warranty on power rectifier

Processes: Flux-Cored, Submerged Arc Product Number: K210-2 NA-3S Controller K388-2 NA-4 Controller K208A NA-3S/NA-4 Head K209A NA-3SF/NA-4F Head AC Input Power: 115/1/50/60 Wire Size Range (Varies by Model): .035 - 7/32 in (0.9 - 5.6 mm) Wire Feed Speed Range: NA-3S: 25 - 650 ipm (0.6 - 16.5 m/min) / NA-4: Subject to arc voltage used Net Weight/Dimensions (H x W x D) NA-3S: 44 lbs. (20 kg) 11.0 x 13.5 x 12.3 in. (279 x 343 x 312 mm) NA-4: 35 lbs. (16 kg) 11.0 x 13.5 x 9.70 in. (279 x 343 x 246 mm) FEATURES *Operating Versatility - Easily adapt to a wide range of wire feed speeds and wire sizes. *Compact Units With Excellent Flexibility - Fit into simple fixtures or the most complex automated production lines. *Rugged Construction - Minimize downtime and maintenance costs. RECOMMENDED LINCOLN ELECTRIC POWER SOURCES * NA-3S: Idealarc® DC-600, DC-655, DC-1000 and DC-1500 * NA-4: Idealarc® AC-1200

ArcLink®-enabled Controller for Power Wave® AC/DC 1000® SD Systems: The MAXsa® 10 controller offers a single monitoring and control point for the entire hard automation welding system. Operators have full control over AC and DC welding parameters and easy PLC interfacing to control fixture travel, timers and other system commands. Key Features: •Severe Duty Ready – The controller is IP23 rated and ready for operation in harsh environments. • Pendant Box – Mount the controller in the standard protective box or remove the pendant for hand-held operation. Extend hand-held operation from 4 feet (1.2 m) up to 100 feet (30.5 m) with an ArcLink® extension cable. • Eight Procedure Memories – Pre-set and save your optimal welding parameters for repeating applications and recall later for fast changeovers. • User-Friendly Controls – Clear digital display and controls make it easy to set weld modes, AC operation, strike/start/end options, travel stop/ start, timers and other parameters. • Limit Control – Apply operator procedure limits or lockout on any or all parameters. • Waveform Control Technology® – Allows the user to choose from a library of pre-programmed weld modes. Parameters for each mode can be adjusted within a limited range to achieve optimal balance between deposition rate and penetration.

APPLICATIONS: *Construction *Aerospace *Fabrication *Automotive *Production *Weld Training FEATURES *PowerConnect® Technology (Patent-Pending) – Automatically adjusts to input power from 200-600V, 50 or 60 Hz, single phase or three phase. Welding output remains constant through the entire input voltage range. *Tribrid® Power Module – Exceptional welding performance with high power factor and efficiency. *CheckPoint® – A cloud-based system to view or analyze your welding data. Track equipment usage, store weld data, configure fault limits and more. *Optional 115V (10A) AC Duplex Auxiliary Power Receptacle – Features patent-pending Surge Blocker™ Technology to ensure simultaneous welding performance is not compromised by high starting current devices such as grinders (typically requiring 60A or more peak surge current). *Compact and Durable Case – IP23 rated to withstand harsh environments. *Standard Ethernet – Allows for effortless software upgrades through powerwavesoftware.com

Features • 380-575 VAC, 50/60 Hz Voltage Input – offers the ability to be connected anywhere in the world. • No hardware reconfiguration required with easy polarity switching – eliminates downtime. • Easy to parallel machines or run multiple arcs. • 3-Phase voltage Input – eliminates the imbalance associated with transformer-based AC welding machines. • 95% power factor correction – enables connection of multiple machines on the same plant infrastructure for lower installation costs. • Severe duty – can be stored outdoors. IP23 rated. • ArcLink®, ethernet and DeviceNet™ communication – offers remote process monitoring, control and troubleshooting. • True Energy™ – measures, calculates and displays instantaneous energy in the weld for critical heat input calculations. • Production Monitoring™ 2.2 – track equipment usage, store weld data and configure limits to assist in welding efficiency analysis. • Software based controls – can be upgraded as new features become available. • iARC™ digital control – 90 times faster than the previous generation, delivering a responsive arc.

Lincoln Electric Pipefab Welding System for Pipe & Vessel Fabrication

Key Features: The POWER IND 500I is a semi-automatic, constant voltage (CV)/ constant current (CC) DC welding power source. This machine features a smaller footprint and the same rugged look that customers have come to expect from all Lincoln Electric industrial welding power sources. Advantage Lincoln: *IGBT inverter technology, inverter frequency is up to 20 kHz. *Light weight and portable- easy to move and suitable for stacking *Features Lincoln’s latest generation Inverter technology for maximum reliability *Thermal overload and single phasing protection for stable welding output under all demanding conditions *Light weight 4 roll drive wire feeder with servo control motor and quick changeover wire feeding mechanism *Adjustable inductance control - Gives operator control over spatter issues *Adjustable crater voltage and crater current control – Gives operator control to achieve good weld ends. *Enclosed wire feeder with spool cover to avoid rusting of wire *Close loop feedback control, stable output voltage, strong ability of power supply compensation *Specially designed dynamic characteristic control circuit, little spatter, good welding surface, higher efficiency *Arc ending, ball cutting, soft wire feeding *Wire diameter range- 0.8 -1.6 mm Processes MIG/MAG, STICK , FCAW Packages includes: *Wire feeder *Interconnection cable *Gas regulator with heater

Key Features: The POWER IND 400I is a semi-automatic, constant voltage (CV)/ constant current (CC) DC welding power source. This machine features a smaller footprint and the same rugged look that customers have come to expect from all Lincoln Electric industrial welding power sources. Advantage Lincoln: *Light weight and portable- easy to move and suitable for stacking *Features Lincoln’s latest generation Inverter technology for maximum reliability *Thermal overload and single phasing protection for stable welding output under all demanding conditions *Light weight 4 roll drive wire feeder with servo control motor and quick changeover wire feeding mechanism *Adjustable inductance control - Gives operator control over spatter issues *Adjustable crater voltage and crater current control – Gives operator control to achieve good weld ends. *Enclosed wire feeder with spool cover to avoid rusting of wire *Wire diameter range- Solid wire :- 0.8 -1.2 mm Flux cored:- 1.2 – 1.6mm Processes: MIG/MAG, STICK , FCAW Packages includes *Wire feeder *Interconnection cable *Gas regulator with heater

ESAB-Migmatic-250 Compact MIG/MAG for automobile / sheet metal industry

ESAB MIG 400i CCCV Robust Inverter for MIG & MMA Welding Machine

ESAB C250i Compact Inverter MIG Equipment

ESAB buddy-mig-400i-500i Rugged & Reliable Inverter Mig/Mag Welding Machine

ESAB Auto K400 Compact Design Thyristorised Mig / Mag Equipment

ESAB Buddy Mig 500i Rugged & Reliable Inverter Mig/Mag Welding Machine

ESAB Aristo Mig U4000i & 5000i Optimum Welding Solutions

ESAB Aristo® 500ix Powerful Multi Process Welding Machine

Aristo Mig 5000i Machine

Aristo Mig 4004i Pulse Machine

ESAB Aristo MIG 4001i

ESAB Aristo Mig 3001i & C3000i

ESAB Aristo 500ix Powerful Multi Process Welding Machine

ESAB PUG Cutting Machine

ESAB Handy Plasma 45I

ESAB Cutmaster 120 Plasma Cutting System

ESAB Cutmaster 100/120 Heavy Industrial Hand Plasma Equipment

ESAB Cutmaster 60I

ESAB Cutting Blowpipe NM250

ESAB Rogue ES200i Pro Machine

ESAB Renegade ES 300iP Machine

ESAB Renegade ES 300i Multi-Voltage, Industrial Stick/TIG Machine

ESAB Xpert Weld 200 Machine

ESAB ARC 400i Compact Inverter for MMA Welding Machine

ESAB ARC 300i Compact Inverter for MMA Welding Machine

ESAB ARC 250i Heavy Duty Single Phase MMA Inverter Machine

ESAB Arc 200i Machine

ESAB Dual Operator EDW 2x300 for Pipe Welding application

ESAB Tube to Tube Sheet Weld Head: Model: 96

ESAB AMI 9 Serise Fusion (GTAW) Weld Heads

ESAB AMI Model 127 Programmable Gtaw Power Supply