Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048031990 (International callers) or 08048031990 (Indian callers).
Idealarc® DC-1000, Idealarc® DC-1500 : Industrial DC Multi-process welders
If an application requires pure welding power combined with multi-process power, then the Idealarc® DC-1000 with 1300 amps of smooth DC output is your best investment. Designed for Semi-automatic and automatic welding, the precise control of the Idealarc® DC-1000 provides superior MIG, flux-cored, submerged-arc welding and excellent air carbon arc gouging with up to 16.0 mm diameter carbons. The Idealarc® DC-1500 is a multi-process DC arc welding power source for automatic welding applications. It produces outstanding arc characteristics on both constant voltage and constant current processes for great welding versatility from a single power source. A single range full output control potentiometer provides outstanding welding performance.
Features (Idealarc® DC1000)
• 500 amp output connections provide enhanced arc characteristics for low amperage flux-cored (FCAW) and MIG welding procedures.
• Single range control for precise output control and easy operation.
• Terminal strip and output studs for remote connections and cable.
• Low profile case allows installation of a work-bench and stacking up to 2 machines to conserve floor space.
• Removable side panels for easy access to internal parts.
• Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%.
• Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.
• Seven-year warranty on power rectifier
Features (Idealarc® DC1500):
• Full range output voltage control for easy operation and precise output control.
• Mode switch used to select the desired output characteristics for the process being used.
• Line voltage compensation for maintaining weld consistency, even with line voltage changes of ±10%.
• Fan cooled with electronic and thermostatic protection from current overload and excessive temperatures.
• Function lights built into the printed circuit boards speed diagnostics.
• Windings and rectifiers protected against moisture and corrosive environments.
• Removable side panels for easy access to internal parts.
• Recessed front panel protects operating controls.
• Terminal strip and output studs for remote connections and cable.
• Seven-year warranty on power rectifier.
The TIG-MAX® works with a brush through which electrical current is passed. With the brush, a cleaning
liquid is absorbed and applied to the areas to be cleaned. The liquid is used to remove the iron oxide stains
formed during welding. The brush converts the electrical current into high temperatures, especially at the
bristle ends. The liquid, which is relatively harmless at room temperature, is heated by the brush to temperatures
at which it becomes much more reactive, resulting in an accelerated chemical action on the stainless
steel surface. Unlike pickling paste, the active ingredients of the cleaning fluid are not inherently harmful
to health. When used correctly, the fluids are non-toxic to the environment.
During the welding process, the pulse parameters are dynamically adjusted to keep constant arc length even when external disturbances occur(such as a changing wire extension length). As a result, the dynamic characteristics and arc stability are enhanced significantly. The uniform pulse frequency makes the welding sound softer, which greatly reduces the noise generated by welding. The strictly control on the one pulse one droplet transfer improves the welding quality and reduces the welding defects.The arc ignition adopts asynchronous curved surface acceleration control. The arc start energy is dynamically adjusted, which can quickly establish and stabilize the molten pool and improve the successful rate of arc ignition. Burn-back control utilizes controllable braking ball cancelling technology to improve the consistency of molten ball size. At the same time,the arc ignition and burn-back time are shortened, speeding up the welding cycle and improving production efficiency.
During the welding process, the pulse parameters are dynamically adjusted to keep constant arc length even when external disturbances occur(such as a changing wire extension length). As a result, the dynamic characteristics and arc stability are enhanced significantly. The uniform pulse frequency makes the welding sound softer, which greatly reduces the noise generated by welding. The strictly control on the one pulse one droplet transfer improves the welding quality and reduces the welding defects.The arc ignition adopts asynchronous curved surface acceleration control. The arc start energy is dynamically adjusted, which can quickly establish and stabilize the molten pool and improve the successful rate of arc ignition. Burn-back control utilizes controllable braking ball cancelling technology to improve the consistency of molten ball size. At the same time,the arc ignition and burn-back time are shortened, speeding up the welding cycle and improving production efficiency.
