Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048031990 (International callers) or 08048031990 (Indian callers).
DETAILS
Whether in a shop or in the field, the Flextec 350X welder is built to perform. Equipped with CrossLinc® technology, the Flextec 350X welder can be controlled from hundreds of feet away without expensive and inconvenient control cables. Desert Duty® and IP23 rated, it can withstand harsh outdoor conditions and outperform other welders in its class.
In the field, the Flextec 350X PowerConnect is a rugged multi-process power source, this model stays reliable and offers much more than other inverter-based welders in its class.
In the shop, the Flextec 350X PowerConnect model is built to work with all 42V feeders for your factory applications. It is also compatible with Arclink® digital feeders to provide synergic pulsed MIG modes and memories for quick setup and seamless connectivity.
The Flextec 350X PowerConnect model also adds the ability to weld with any input voltage between 200 and 600 volts and adds basic pulsed MIG output as a standard feature.
Features
PowerConnect supports any incoming voltage 200-600V, 1/3-phase, 50/60 Hz.
CrossLinc Technology compatible
Supports pulsed MIG with compatible ArcLink wire feeder such as Power Feed feeders.
Typical Applications
General Fabrication
Pulsed MIG
Where portability is needed
Varying input voltages
The TIG-MAX® works with a brush through which electrical current is passed. With the brush, a cleaning
liquid is absorbed and applied to the areas to be cleaned. The liquid is used to remove the iron oxide stains
formed during welding. The brush converts the electrical current into high temperatures, especially at the
bristle ends. The liquid, which is relatively harmless at room temperature, is heated by the brush to temperatures
at which it becomes much more reactive, resulting in an accelerated chemical action on the stainless
steel surface. Unlike pickling paste, the active ingredients of the cleaning fluid are not inherently harmful
to health. When used correctly, the fluids are non-toxic to the environment.
During the welding process, the pulse parameters are dynamically adjusted to keep constant arc length even when external disturbances occur(such as a changing wire extension length). As a result, the dynamic characteristics and arc stability are enhanced significantly. The uniform pulse frequency makes the welding sound softer, which greatly reduces the noise generated by welding. The strictly control on the one pulse one droplet transfer improves the welding quality and reduces the welding defects.The arc ignition adopts asynchronous curved surface acceleration control. The arc start energy is dynamically adjusted, which can quickly establish and stabilize the molten pool and improve the successful rate of arc ignition. Burn-back control utilizes controllable braking ball cancelling technology to improve the consistency of molten ball size. At the same time,the arc ignition and burn-back time are shortened, speeding up the welding cycle and improving production efficiency.
During the welding process, the pulse parameters are dynamically adjusted to keep constant arc length even when external disturbances occur(such as a changing wire extension length). As a result, the dynamic characteristics and arc stability are enhanced significantly. The uniform pulse frequency makes the welding sound softer, which greatly reduces the noise generated by welding. The strictly control on the one pulse one droplet transfer improves the welding quality and reduces the welding defects.The arc ignition adopts asynchronous curved surface acceleration control. The arc start energy is dynamically adjusted, which can quickly establish and stabilize the molten pool and improve the successful rate of arc ignition. Burn-back control utilizes controllable braking ball cancelling technology to improve the consistency of molten ball size. At the same time,the arc ignition and burn-back time are shortened, speeding up the welding cycle and improving production efficiency.
