HSF TIG-MAX SURFACE CLEANING SYSTEM The TIG-MAX Weld Cleaning System works with a brush/surface pad through which electrical current is passed. With the brush, a cleaning liquid is absorbed and applied to the areas to be cleaned. The liquid is used to remove the iron oxide stains formed during welding. The brush converts the electrical current into high temperatures, especially at the bristle ends. The liquid, which is relatively harmless at room temperature, is heated by the brush to temperatures at which it becomes much more reactive, resulting in an accelerated chemical action on the stainless steel surface. Unlike pickling paste, the active ingredients of the cleaning fluid are not inherently harmful to health. When used correctly, the fluids are non-toxic to the environment. The TIG-MAX Weld Cleaning System is a safe and effective device for cleaning the surfaces of stainless steel, especially after welding. It quickly and easily removes the blue and brown iron oxide stains without altering the surface finish of the metal. In addition, the TIG MAX Stainless Steel Cleaning System passivates the metal in the same operation, so that the complete, desired result can be achieved even faster. The fluids used by the TIG-MAX Cleaning Device become reactive only at high temperatures. Under normal conditions, therefore, they are relatively harmless to the user and the environment. The TIG MAX Weld Cleaning System is also very useful in Tank Cleaning application. For more information on TIG MAX Surface Cleaning System please contact - 95105 60533